Pisut Koomsap

Pisut Koomsap (พิสุทธิ์ ขุมทรัพย์)

Associate Professor
Industrial & Manufacturing Engineering 

P.O. Box 4, Klong Luang 

Pathumthani Thailand 12120 

Phone: (662) 524-5678;

Fax: (662) 524-5697 

E-mail:
pisut@ait.asia

 


EDUCATION

         Ph.D., Industrial and Manufacturing Engineering, The Pennsylvania State University, USA, 2001.
         M.S., Industrial Engineering, University of Louisville, KY USA, 1996.
         B.E., Industrial Engineering, Thammasat University, Bangkok Thailand, 1994.

EXPERIENCE

         2012-present: Associate Professor, Asian Institute of Technology, Pathumthani Thailand

         2003-2012: Assistant Professor, Asian Institute of Technology, Pathumthani Thailand

         2001-2002 : Characterization Engineer, Northrop Grumman Component Technologies, Charlotte, NC USA

         1998-2001 : Graduate Research Assistant, Laser Processing Division, Applied Research Laboratory (ARL), The Pennsylvania State University, PA USA

RESEARCH INTERESTS

         Rapid Prototyping

         Reverse Engineering

         Sketch-Based Modeling

         Rapid Product Development

         Sensing and Control for Manufacturing Processes and Systems

CURRENT RESEARCH (A-CUBE)

         Tiling Automation

         Design by Customer

         RP-Based Scaffold Fabrication

         Design & Development of RP Systems

         Innovative Design for Customer Experience

         Direct Integration of RP with Sketch-Based Modeling and Reverse Engineering

TEACHING

         AT73.02 Advanced Manufacturing Processes

         AT73.03 Engineering Metrology

         AT73.06 Product Design and Development

         AT73.14 Rapid Prototyping and Manufacturing

         AT73.993 Selected Topic: Computer Control for Manufacturing

         UG302 Engineering Economics *

         IE803 Selected Topic: Automating Manufacturing System*

*undergraduate course

PUBLICATIONS

Refereed Journals

J28.  Dhakal, D., Koomsap, P., Lamichhane, A. and Anal, A.K. (2018). Optimization of Collagen Extraction from Chicken Feet by Papain Hydrolysis and Synthesis of Chicken Feet Collagen Based Biopolymeric Fibres, Food Bioscience, DOI: 10.1016/j.fbio.2018.03.003

J27.  Rasool, F., Koomsap, P., Costa, M.C., Characteristics and Potential for Successful Co-Creation, Journal of Industrial Integration and Management, Volume 2, 1750015

J26.   Peganant, P., and Koomsap, P., (2017). Improving Decision Making in Product Flow-Based Tiling Automation for Custom Mosaic Design, Assembly Automation Volume 37, Issue 4, pp. 391-399, DOI:10.1108/AA-07-2016-085

J25.  Koomsap, P., and Charoenchokdilok, T., “Improving Risk Assessment for Customer-Oriented FMEA,”  Total Quality Management & Business Excellence, DOI: 10.1080/14783363.2016.1274229.

J24. Parajuli, D., Koomsap, P., Parkhi, A.A., and Supaphol, P., (2016). Experimental Investigation on Process Parameters of Near-Field Deposition of Electrispinning-Based Rapid Prototyping, Virtual and Physical Prototyping, Volume 11, Issue 3, pp. 193-207,DOI: 10.1080/17452759.2016.1210314.

J23. Chanthakulchan, A., Koomsap, P., Parkhi, A.A., and Supaphol, P., (2015). Environmental Effects in Fiber Fabrication Using Electrispinning-Based Rapid Prototyping, Virtual and Physical Prototyping, Volume 10, Issue 4, pp. 227-237, DOI: 10.1080/17452759.2015.1112411.

J22. Phooripoom, N., and Koomsap, P., (2015). Design and Development of Tiling Automation for Custom Mosaic Design, Robotics and Computer Integrated Manufacturing, Volume 35, pp. 55-68, DOI:10.1016/j.rcim.2015.02.005.

J21. Putthawong, S., Koomsap, P., and Chansri, N., (2014). Image-Based Adaptive Crosshatching Process for Laminated Object Manufacturing, Virtual and Physical Prototyping, Volume 9, Issue 4, pp. 233-249, DOI: 10.1080/17452759.2014.954823.

J20. Chansri, N., and Koomsap, P., (2014). Sketch-based modeling from a paper-based overtraced freehand sketch, International Journal of Advanced Manufacturing Technology, Volume 75, Issue 5-8, pp. 705-729, DOI: 10.1007/s00170-014-6161-4.

J19. Chanthakulchan, A., Koomsap, P., Auyson, K., and Supaphol, P., (2015). Development of an Electrospinning-Based Rapid Prototyping for Scaffold Fabrication, Rapid Prototyping Journal, Volume 21, Issue 3, pp. 329-339, DOI: 10.1108/RPJ-11-2013-0119. (a highly commended paper in the 2016 Emerald Literati Network Awards for Excellence)

J18. Koomsap, P., and Chansri, N., (2014). Topological Hierarchy-Contour Tracing Algorithm for Nests of Interconnected Contours, International Journal of Advanced Manufacturing Technology, Volume 70, Issue 5, pp. 1247-1266, DOI:10.1007/s00170-013-5330-1

J17. Nakthewan, K., and Koomsap, P., (2013). Direct Contour Generation for Structured Light System-Based Selective Data Acquisition, Virtual and Physical Prototyping, Volume 8, Issue 2, pp. 135-163, DOI:10.1080/17452759.2013.806865

J16. Phattanaphibul, T., Koomsap, P., Irwansyah, and Nachaisit, S., (2014). Development of SVM RP technique for PLA-Based Scaffolds, Rapid Prototyping Journal Vol. 20, Issue 2, pp.90 104, DOI: 10.1108/RPJ-05-2012-0042

J15. Risdiyono, and Koomsap, P., (2013). Design by Customer: Concept and Application, Journal of Intelligent Manufacturing, Volume 24, Issue 2, pp. 295-311,DOI: 10.1007/s10845-011-0587-4.

J14. Phattanaphibul, T., and Koomsap, P., (2012). Investigation of PLA-based Scaffolds Fabricated via SVM Rapid Prototyping, Journal of Porous Materials, Volume 19, Issue 4, pp. 481-489, DOI: 10.1007/s10934-011-9497-2.

J13. Chansri, N., and Koomsap, P., (2012). Automatic Single Line Drawing Creation from a Paper-Based Overtraced Freehand Sketch, International Journal of Advanced Manufacturing Technology, Volume 59, Issue 1 pp. 221-242, DOI: 10.1007/s00170-011-3487-z.

J12. Rianmora, S., and Koomsap, P., (2011). Structured Light System-Based Selective Data Acquisition, Robotics and Computer Integrated Manufacturing, Volume 27, Issue 4, pp. 870-880, DOI 10.1016/j.rcim.2011.02.002.

J11. Irwansyah, Koomsap, P., and Phattanaphibul, T., (2011). Exploring SVM Rapid Prototyping in Scaffold Fabrication, the Asian International Journal of Science and Technology in Production and Manufacturing Engineering (AIJSTPME) Volume 4, Issue 1, (selected from the 10th Global Congress on Manufacturing and Management).

J10. Kuagoolkijgarn, P., Koomsap, P., and Chansri, N., (2010). A New Algorithm for Tracing Nests of Interconnected Contours, International Journal of Advanced Manufacturing Technology, Volume 50, Issue 5, pp. 717-727, DOI 10.1007/s00170-010-2540-7.

J9. Rianmora, S., and Koomsap, P., (2010). Recommended Slicing Positions for Adaptive Direct Slicing by Image Processing Technique, International Journal of Advanced Manufacturing Technology, Volume 46, Issue 9, pp. 1021-1033, DOI 10.1007/s00170-009-2162-0.

J8. Rianmora, S., Koomsap, P., and Van Hai, D.P., (2009). Selective Data Acquisition for Direct Integration of Reverse Engineering and Rapid Prototyping, Virtual and Physical Prototyping, Volume 4, Issue 4, pp. 227 239. (editors choice for 2009)

J7. Soonanon, P., and Koomsap, P., (2009). Towards Direct Transformation of Orthographic-View Drawing into a Prototype Virtual and Physical Prototyping, Volume 4, Issue 2, pp. 75 90.

J6. Tang, T.D., Bohez, E. L.J., and Koomsap, P., (2007). The Sweep Plane Algorithm for Global Collision Detection with Workpiece Geometry Update for Five-Axis NC Machining, Computer-Aided Design, pp.1012-1024.

J5. Koomsap, P., Shaikh, N.I., and Prabhu, V.V., (2005). Integrated Process Control and Condition-Based Maintenance Scheduler for Distributed Manufacturing Control Systems, International Journal of Production Research, pp.1625-1641.

J4. Koomsap, P., Prabhu, V.V., Shaikh, N.I., Schriempf, J.T., and McDermott, J.H., (2003). "Condition Monitoring and Lifetime Estimation of a CO2 Laser," Journal of Laser Applications, pp. 285-293.

J3. Koomsap, P., Prabhu, V.V., Schriempf, J.T., and Reutzel, E.W., (2001). "Simulation-Based Design of Laser-Based Free-Forming Process Control," Journal of Laser Applications, pp. 47-59.

J2. Koomsap, P., and Prabhu, V.V., (1999). "Field Programmable Gate Arrays for High Performance Manufacturing Automation, " International Journal of Intelligent Control and Systems, pp.701-723.

J1. Prabhu, V.V., Cho, S., and Koomsap, P., (1999). "High Performance Computing and Communication for Real-Time Feedback in Distributed Manufacturing Control Systems," CIRP Journal of Manufacturing Systems, pp.79-83.

Conference Proceedings

C60. Dharmerathne, B.R.Y., Koomsap, P., “Investigation of customers’ responses to Kano questionnaire” Asia – Design Engineering Workshop (A-DEWS) 2017, Seoul, Korea, December 2017

C59. Rosen, D.W., Hussadintorn Na Ayutthaya, D., and Koomsap, P., “Additive and digital manufacturing design tools: an application of product-service system design” Asia – Design Engineering Workshop (A-DEWS) 2017, Seoul, Korea, December 2017

C58. Rasool, F, Koomsap, P., and Costa, M.C., “Firm’s Potential for Successful Co-Creation” ISPE 2017 International Conference on Transdisciplinary Engineering, Singapore, July 2017.

C57.  Rasool, F, Koomsap, P., and Costa, M.C., “Identifying Firm Characteristics and Potential for Successful Co-Creation – Literature Review” ISPE 2017 International Conference on Transdisciplinary Engineering, Singapore, July 2017.

C56.  Hussadintorn Na Ayutthaya, D., and Koomsap, P., “Assessment of Student Learning Experience with ‘LOVE’ The 11th annual International Technology, Education and Development Conference, INTED2017, Valencia, Spain, March 2017.

C55.  Hussadintorn Na Ayutthaya, D., and Koomsap, P., “Identify Student Participation in Co-Creation of Learning Activities” The 11th annual International Technology, Education and Development Conference, INTED2017, Valencia, Spain, March 2017.

C54. Suwannimitr, P., and Koomsap, P., “Design for Ease of Service,” The International Conference on Sustainable Smart Manufacturing (S2M), Lisbon, Portugal, October 2016

C53. Hussadintorn Na Ayutthaya, D., and Koomsap, P., “Incorporating Customer Perceived Value in Designing Customer Experience,” The International Conference on Sustainable Smart Manufacturing (S2M), Lisbon, Portugal, October 2016

C52. Hussadintorn Na Ayutthaya, D., Nunes, M., and Koomsap, P., “Co-creation experience in higher education (HE) sector” The 3rd International Conference on Project Evaluation (ICOPEV 2016), Guimar?es, Portugal, June 2016

C51. Bain, S., and Koomsap, P., Preliminary Study on Solvent Effect in Fiber Fabrication in Near-Field Electrospinning Proceedings of the 2nd International Conference on Progress in Additive Manufacturing, Singapore, May 2016, pp. 415-420.

C50. Chanthakulchan, A., Parkhi, A.A., Koomsap, P., and Supaphol, P., Environmental Effects in Fiber Fabrication Using Electrispinning-Based Rapid Prototyping, Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Singapore, May 2014, pp. 428-433.

C49. Chansri, N., Janokul, K., Thamnitatsana, N., and Koomsap, P., Experimental Study on Support Material Composition for Selective Vacuum Manufacturing RP Technique, Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Singapore, May 2014, pp. 127-132.

C48. Auyson, K., Koomsap, P., Chanthakulchan, A., and Supaphol, P., Investigation of Applying Electrospinning in Fused Deposition Modeling for Scaffold Fabrication, High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping: Proceedings of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 1-5 October, 2013, pp. 149-154.

C47. Senanan, P., Chansri, N., and Koomsap, P., Investigation of Process Condition for Constructing Plaster of Paris Part with Selective Vacuum Manufacturing, High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping: Proceedings of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 1-5 October, 2013, pp. 101-105.

C46. Thienhirun, S. and Koomsap, P., Application of Design by Customer in Tile Decoration Business, the Advances in Production Management Systems. Sustainable Production and Service Supply Chains, IFIP Advances in Information and Communication Technology, Vol. 415, 2013, pp 202-209

C45. Chansri, N., and Koomsap, P., Supporting Rapid Product Development with Sketch-Based Modeling, Advances in Production Management Systems. Sustainable Production and Service Supply Chains, IFIP Advances in Information and Communication Technology, Vol. 415, 2013, pp 270-277

C44. Kurniawan, T. O., and Koomsap, P., Development of Screen Making System for Rapid Customized T-Shirt Printing, the 13th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2012), Phuket, Thailand, December 2012

C43. Akkakarn, S., Phattanaphibul, T., and Koomsap, P., Development of Rubber Artifacts via SVM Rapid Prototyping, the 13th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2012), Phuket, Thailand, December 2012

C42. Janokul, K., Chansri, N., Koomsap, P., and Akkakarn, S., Effect of Flour Type on Cavity Forming for Selective Vacuum Manufacturing, the 13th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2012), Phuket, Thailand, December 2012

C41. Wicaksono, M. B., Koomsap, P., Risdiyono, and Nakpathom, M., Design of Automatic Online Alignment for Multi-Color Flat Screen Printing Process, the 4th International Conference on Product Design and Development, Yorgyakata, November 2011

C40. Auyson, K., Koomsap, P., and Wicaksono, M. B., Pick and Place Algorithm for Online Waste Removal Process in LOM, the 4th International Conference on Product Design and Development, Yorgyakata, November 2011

C39. Rianmora, S., Koomsap, P. and Kuagoolkijgarn, P., Application of contour tracing algorithm for assisting non-contact data acquisition Innovative Developments in virtual and physical prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, September-October 2011, pp. 233-239.

C38. Chansri, N. and Koomsap, P., Image-Based Direct Slicing of a Single Line Drawing for Rapid Prototyping Innovative Developments in virtual and physical prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, September-October 2011, pp. 241-247.

C37. Chansri, N., Koomsap, P., and Kuagoolkijgarn, P., Application of Contour Tracing Algorithm in 3D Modeling from a Paper-Based Overtraced Freehand Sketch, 21st International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2011), Taichung, Taiwan, June 2011

C36. Phattanaphibul, T., and Koomsap, P., Preparing Support Material for Medical Application on SVM Rapid Prototyping, the 11th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2010), Melaka, Malaysia, December 2010

C35. Risdiyono, and Koomsap, P., Customer Involvement in Value Creation, the 11th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2010), Melaka, Malaysia, December 2010

C34. Chansri, N., and Koomsap, P., Classifying and Connecting Segments Extracted from Paper-Based Overtraced Freehand Sketch, the 11th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2010), Melaka, Malaysia, December 2010

C33. Rianmora, S., and Koomsap, P., Supporting Rapid Product Development with Structured Light System-based Selective Data Acquisition, the 11th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2010), Melaka, Malaysia, December 2010

C32. Tangwarodomnukun, V., Koomsap, P., and Chowdhary, A., A Preliminary Study of Applying Waterjet for Rapid Prototyping, the 11th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2010), Melaka, Malaysia, December 2010

C31. Irwansyah, Koomsap, P., and Phattanaphibul, T., Exploring SVM Rapid Prototyping in Scaffold Fabrication, the 10th Global Congress on Manufacturing and Management, Bangkok, Thailand, November 2010

C30. Risdiyono, and Koomsap, P., Design by Customer: a Management of Flexibilities, 1st International Conference on Design Creativity(ICDC2010), Kobe, Japan, November 2010

C29. Kuagoolkijgarn, P., and Koomsap, P., Applying Image Processing for Rapid Customization of Multi-Color Nested Products, New World Situation: New Directions in Concurrent Engineering, the 17th ISPE International Conference on Concurrent Engineering, Cracow, Poland, September 2010, pp. 369-376.

C28. Chansri, N., and Koomsap, P., Ongoing Research on Adaptive Layered Manufacturing from Overtraced Freehand Sketch, New World Situation: New Directions in Concurrent Engineering, the 17th ISPE International Conference on Concurrent Engineering, Cracow, Poland, September 2010, pp. 11-18.

C27. Rianmora, S., and Koomsap, P., Applying 2D Projective Transformations for Structured Light System-Based Selective Data Acquisition, the 2nd International Conference on Computer and Automation Engineering (ICAAE 2010), Singapore, February 2010

C26. Tangpaisannukul, S., and Koomsap, P., Development of a User-Friendly Process Modeling Tool for Operator Training Simulator, the 10th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2009), Kitakyushu, Japan December 2009

C25. Phattanaphibul, T., and Koomsap, P., Improving Flowability of PLA Powder for Rapid Prototyping Process, the 10th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2009), Kitakyushu, Japan December 2009

C24. Soonanon, P., and Koomsap, P., Establishing Contours for Layer-Based Geometrical Reconstruction, the 10th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2009), Kitakyushu, Japan December 2009

C23. Risdiyono, and Koomsap, P., Crowdscreening: A Natural Selection for Mass Customization, The 5th World Conference on Mass Customization & Personalization, Helsinki, Finland, October 2009

C22. Chansri, N., and Koomsap, P., Dual Lines Extraction for Identifying Single Line Drawing from Paper-Based Overtraced Freehand Sketch, Global Perspective for Competitive Enterprise, Economy and Ecology, Proceedings of the 16th ISPE International Conference on Concurrent Engineering, Taipei, Taiwan, July 2009, pp. 455-463.

C21. Risdiyono, and Koomsap, P., A Study of Design by Customers: Areas of Application, Global Perspective for Competitive Enterprise, Economy and Ecology, Proceedings of the 16th ISPE International Conference on Concurrent Engineering, Taipei, Taiwan, July 2009, pp. 445-453.

C20. Ut, N. V., Koomsap, P., and Tangwarodomnukun, V., Simplifying Abrasive Waterjet Cutting Process for Rapid Manufacturing, Global Perspective for Competitive Enterprise, Economy and Ecology, Proceedings of the 16th ISPE International Conference on Concurrent Engineering, Taipei, Taiwan, July 2009, pp. 53-60.

C19. Rianmora, S., and Koomsap, P., The application of fringe projection concept for selective data acquisition, 2009 International Conference on Computer and Automation Engineering, Bangkok, Thailand March 2009

C18. Sangthammatone, N., Pisutpaisal, N., Koomsap, P., and Vongthanasunthorn, N., Production of Bioelectricity from Artificial Wastewater Using Microbial Fuel Cell Pure and Applied Chemistry International Conference, Phisanulok, Thailand, January 2009.

C17. Pisutpaisal, N., and Koomsap, P., Generation of Electricity from Wastewater under Acidic Conditions. 4th International Conference on Environmental Science and Technology, USA, 2008.

C16. Rianmora, S., and Koomsap, P., Investigating the Influence of Color Light in Data Acquisition, the 9th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2008), Bali, Indonesia, December 2008

C15. Rianmora, S., Koomsap, P., and Van Hai, D.P., Selective Data Acquisition for Direct RE-RP Interface, the 9th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2008), Bali, Indonesia, December 2008

C14. Chansri, N., and Koomsap, P., Identifying Single Line Drawing from Paper-Based Overtraced Freehand Sketch, the 9th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2008), Bali, Indonesia, December 2008

C13. Ngoc Truc, N.T., Koomsap, P., and Luong, H.L., Improving Quality Function Deployment to better support Technology Roadmapping, the 9th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2008), Bali, Indonesia, December 2008

C12. Soonanon, P., Koomsap, P., and Chansri, N., Identifying Contour(s) for Layer-Base Geometrical Reconstruction, the 8th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2007), Kaohsiung, Taiwan, December 2007

C11. Tangwarodomnukun, V., Koomsap, P., Opaprakasit, P., and Phattanaphibul, T., Coloring Polylactide Powder for Multicolor Rapid Prototyping, the 8th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2007), Kaohsiung, Taiwan, December 2007

C10. Phattanaphibul, T., Opaprakasit, P., Koomsap, P., and Tangwarodomnukun, V., Preparation of Biodegradable PLA for Powder-Based Rapid Prototyping, the 8th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2007), Kaohsiung, Taiwan, December 2007

C9. Rianmora, S., Koomsap, P., and Van Hai, D.P., A Concept of Adaptive Reverse Engineering and its Application for Automotive Part Design, Third National Conference on Automotive Engineering, Bangkok, Thailand, 2007

C8. Tuong, N. L., Koomsap, P., and Soonanon, P., Preliminary Study on Driver Response for Driver Based Collision Avoidance System, Third National Conference on Automotive Engineering, Bangkok, Thailand, 2007

C7. Risdiyono, and Koomsap, P., Toward a Design by Customers for Automotive Accessories, Third National Conference on Automotive Engineering, Bangkok, Thailand, 2007

C6. Soonanon, P., and Koomsap, P., New Approach for Geometrical Reconstruction from Orthographic Views Drawings, the 7th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2006), Bangkok, Thailand, December 2006 p. 963-969

C5. Risdiyono, Koomsap, P., and Opaprakasit, P., "Modifying Rapid Prototyping Technique for Natural Rubber Parts," the 7th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2006), Bangkok, Thailand, December 2006 p. 2154-2158

C4. Risdiyono, Opaprakasit, P., and Koomsap, P., "Enhancing Natural Rubber's Property for Rapid Prototyping," Proceedings of the 8th International Conference on Industrial Management, 2006 p. 1178-1183

C3. Sunanon, P., Koomsap, P., and Nachaisit, S., Image Processing for Rapid Prototyping Technology, Proceedings of the 2005 International Conference on Simulation and Modeling, Bangkok, Thailand, January 2005 p.249-253

C2. Koomsap, P., Reutzel, E.W., Martukanitz, R.P., and Spawr, W., "Development of High Power Scanning Optics," International Congress on Applications of Lasers & Electro Optics (ICALEO), 1999

C1. Koomsap, P., Parsaei, H.R., Leep, H.R., and Pierce, J.H., "Application of Programmable Logic Controller for Robotic Workcell Safety," Proceeding of Engineering Design and Automation, 1997

R&D PROJECTS

R6. The development of Automatic Flat screen Printing Machine (in collaboration with Dr. Monthon Nakpathom, National Metal and Materials Technology Center (MTEC))

R5. Flow Modeling in Hard Disk Drives (in collaboration with Prof. Joydeep Dutta (PI) and Dr. Huynh T. Luong)

R4. Operator Training Simulator for Cement Mill Process

R3. Development of Rapid Prototyping System for Sanitary Products

R2. Design and Construction of On-line Biochemical Oxygen Demand Sensors as Rapid-BOD-Assay Devices for Monitoring the Quality of Natural Waters and Wastewater Effluents (in collaboration with Dr. Nipon Pisutpaisal, King Mongkukt's Institute of Technology North Bangkok)

R1. Biodegradable Polylactide and Natural Rubber for Multicolor Articles Rapid Prototyping (in collaboration with Dr. Pakorn Opaprakasit, SIIT)

TRAINING PROJECTS

T9. In house training on Product Design and Development for Nawaplastic Industries Co. Ltd (2015)

T8. In house training on Product Design and Development for Nawaplastic Industries Co. Ltd (2011)

T7. In house training on Product Design and Development for Thai Ceramic Co., Ltd. (2010)

T6. In house training on Identifying Customer Needs from Voice of Customer for SCG Building Materials (2010)

T5. In house training on Product Design and Development for Nawaplastic Industries Co. Ltd (2009)

T4. In house training on Product Design and Development for SCG Building Materials (2009)

T3. In house training on Product Design and Development for SCG Building Materials (2008)

T2. In house training on Product Design and Development for Thai acrylic Fibre Co. Ltd (2007)

T1. In house training on Product Design and Development for CCC Polyolefins Co. Ltd (2007)

THESES

HONORS AND AWARDS

         All University National Honor Society, Phi Kappa Phi (1996)

         National Collegiate Engineering Awards, NCEA (1996)

         Industrial Engineering Honor Society, Alpha Pi Mu (1995)


ck for Bangkok, Thailand Forecast

ck for State College, Pennsylvania Forecast